Cleaning your sprinkler heads at least once a year helps your lawn stay green and even throughout the year. Watch this quick video on how to clean your sprinkler heads!

Items Needed:

  1. Step 1: Lift Sprinkler Tip

    Use your fingers to grab a hold of the sprinkler tip and pull it up from the housing.

    Pulling the sprinkler head out of the housing.

  2. Step 2: Hold In Place

    Clamp the vice grips onto the shaft of the sprinkler tip and adjust as needed so that the sprinkler does not fall back down into the housing while you are working.

    Clamping the vice grips onto the shaft of the sprinkler tip.

  3. Step 3: Remove Filter

    Grab the tip of the sprinkler head by the threaded portion, unscrew, and then remove the filter that is inside the line. (Needle nose pliers can help with this step)

    The sprinkler head with the tip removed, exposing the filter.

  4. Step 4: Clean

    Use a towel to clean off any debris that may be on the filter.

    The sprinkler filter with sand and residue on it.

  5. Step 5: Flush

    Leaving the vice grips in place, turn on the sprinkler system to clean out the line for a few seconds.

    Flushing the sprinkler line.

  6. Step 6: Reassemble

    Now that everything is clean, reassemble the sprinkler, drop it back down into the housing, and you are good to go!

[gvblog_contentupgrade cta=”View How-To Videos” heading=”Easy Home Maintenance” link=”” img=””]Need some help? Home maintenance doesn’t have to be hard! Check out our series of Home Maintenance How-To Videos to learn the basics of caring for your Granville Home.[/gvblog_contentupgrade]